How to Increase Your Harddisk Speed

INCREASE HARDDISK SPEED

To speed up your hard disk speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the disk.
This tip is only recommended if you have 256MB RAM or higher.
Follow these steps:

Run SYSEDIT.EXE from the Run command.

Expand the system.ini file window.

Scroll down almost to the end of the file till you find a line called [386enh].

Press Enter to make one blank line, and in that line type

Irq14=4096

Note: This line IS CASE SENSITIVE!!!

Click on the File menu, then choose Save.

Close SYSEDIT and reboot your computer.

Done. Speed improvement will be noticed after the computer reboots.
Update: The most speed improvement is visible with IDE drives, however there are reports that this tweak also does good for SCSI disks. In any case, it won't harm your system, so why not try it yourself and let me know what you find.

How to Burn Movies With Nero [Working On Your DVD Player]

I am going to tell you one way of burning any movie you download so it plays on your home or any other DVD using NERO 7 ULTRA.

1. Open Nero Start Smart
2. Then go to Photo And Video section (up the top where the star is move across)
3. Then Select Make your own DVD-Video
4. Then Select Add Video Files and pick the movie you want to burn
5. after that custom create your menu (can add background, music etc..)
6. click next and see if its all working
7. put in a blank DVD and click next then it will start encoding your movie this normally takes 1-2 hours for the whole thing to complete depending on how long the movie is.

Video Tutorial:

http://www.megaupload.com/?d=MY7AF25B

How to Crack a Master Padlock

1) Get a Master Lock that you know the combination and if possible get another lock to test out if you doing it right.

2) First, we need to find the last number of the combination. To do this pull the “U” shaped thing away from the lock. It helps if its attached to something. (A Locker?). While pulling it out, start to rotate the dial from “0” so you know where to end later. You will notice that the lock will stick to a certain number. Now release the “U” for a second and then start to pull while you start to rotate again.

3) Next write down all the places the lock got stuck at while you were rotating it. There should be exactly 12 places if you did it right. One of these 12 numbers will be the last number of the combination.

4) Now we need to eliminate all of the numbers, but 1 to find the last. There are two types of places where the numbers you found got stuck at. First type is exactly on a number which means it won’t move left or right while pulling up the “U”. The second type is when the number you found was actually stuck between two numbers on the dial, and it would budge a little to the right or left.

5) Since we can determine, which of the 12 numbers were in between two numbers we can now eliminate them. There should have been 7 of those, which means there are only 5 left on you list.

6) Take a look at you list now and you should see that 4 of the 5 numbers left on you list have the same one’s place digit. (ex: 05, 15, 25, 35) These 4 numbers you found are fake and should be eliminated. This last number you have left should be the last number of you combination.

7) To find out the Master Lock Combination is easy now that you have the last digit. You now have 10 first digit possibilities and 10 second digit possibilities. This means you have to try out a maximum of 100 combinations. And don’t think that’s too many because this is much better than having to deal with 64,000 combinations.

How to get the books people sell on ebay for free

This website has links to free copies of all the ebooks that people sell on ebay

http://www.floodle.net/extra/ebayinfo/

How to make a shutdown timer

Step 1.
Right Click on your desktop and choose "New->Shortcut".

Step 2.
In the box that says "Type the location of the shortcut",
type in "shutdown -s -t 3600" with out the quotation marks
and click next.
Note: 3600 are the amount of seconds before your
computer shuts down. So, 60secs*60mins=3600secs.

Step 3.
Make up a name for the shortcut and you're done.
You can change the icon by right clicking->properities->change icon-> browse.

More Info:
-To make an abort key to stop the shutdown timer just create
another shortcut and make the "location of the shortcut"
to "shutdown -a" without the quotes.

How to Burn and Play PS2 and PSX Games

Welcome! In this guide, you will learn the very easy method of making copies of your PS2 and normal Playstation games so that they are playable on the PS2. This guide will provide you with all the information you need to burn PS2 games.

You will need the following things to burn PS2 games:

-a computer with a cd burner

-a blank cd-r (don’t use the re-recordable type a.k.a. cd-rw)

-CDRWIN – The version in this guide is 3.8D

-FireBurner –

-PS2 patcher –

-GameShark 2 for PS2 - the GameShark 2 is available at most stores that sell video games, a few examples would be Best Buy, Circuit City, or Target. You want version 1.0 of the GameShark 2. I have heard that all other versions work, but I have only tested version 1.0. GameShark2 costs about 29.95. Believe me, its worth it!!!

-and a PS2 to play the games.
Burning the PS2

The process of burning ps2 games is easy. It is really only a 3 step process.(read the game, patch the game, and burn the game.)

1) insert game into cd drive.

2) Open up CDRWIN and click on the extract disk/tracks/sectors button.

3) Your settings should be as follows:

For “extract mode” select disk image/ cue sheet

For “read options” select “raw”

For “error recovery” select “abort”

For “jitter correction” select “auto”

For “subcode analysis” select “auto”

Data Speed and Audio Speed should be the same

For “read retry count” type 0

For “subcode threshold” type 300

Make sure you selected the drive that your PS2 game is in

Make sure you typed in the file name (just type the name of the game) and Check the directory that you’re putting your file in.

Then just press “start”

If you get an error in the middle of reading the disk that says something like “can’t read sections xxxx-xxxxx of disk”, it is becase the disk is scratched and CDRWIN can’t read it. Try to clean the disk, if that doesn’t work you just have to use a different game (a different copy of the same game)

4) Once CDRWIN is done, click ok and then exit CDRWIN. Open up the PS2 patcher, select the game file you just created and patch it (make sure you select the “RAW” option.

5) Close the PS2 patcher, next open up Fireburner. Click on the visual cue burner button. When you created your .bin file (the game file) in CDRWIN, a .cue file should have automaticly been created. In that case, drag and drop the .cue file into the Fireburner window. If the .cue file was not created, just drag and drop the .bin file into the Fireburner window. After you have done that, right click (click with the right side button on your mouse) on your file in the Fireburner window, and select “Burn/Test burn”.

6) In the options window that appears, select your cdwriter, select your write speed(doesn’t really matter), and make sure you select “Track at once (TOA) for the recording method. As for the options on the right side of the options window, make sure only the following are checked: “eject cd” and “close session”.

When you have selected the options, click ok and your PS2 game will burn. That’s all you have to do to burn a game.
Burning a Playstion (PSone) game

1) If you want, you can spend 5 minutes using the same method as above to burn your playstation game, but its not necessary. For a playstation game (not PS2) all you need to do is use a program that lets you make an “exact copy” or a “backup disk (CDRWIN)” You don’t need any selected options, you just need to start the game on the PS2 the same way you would a PS2 game.
Starting the game on your PS2

1) Now for the fun part (and challenging part the first couple of times) This may sound a little complicated at first, but after you do it 3 or 4 times, it’s super easy. First things first, you must remove the front of your game drive on your PS2(not a big deal, it can snap on and off).

2) Now insert your gameshark 2 cd(make sure the gameshark memory card is in one of the 2 slots, doesn’t matter which one.)

3) In the gameshark options, choose “start game”, then “without”. Your screen should read “Please insert game disk then press X to continue.”

4) Now this part can be trickey for beginners, so I will provide pictures

-the main purpose of this starting method is to open up the PS2 and swap the gameshark disk with your burned game without the PS2 knowing you did it. DO NOT press the eject button on the PS2!!!

-with the PS2 cd tray cover removed, you will be able to look in and see a while tab inside the PS2. With a credit card (or something like it) gently slide the white tab all the way over to the right, if you did it correctly, this should allow you to manually pull open the PS2 cd tray.

5) Next, take the gameshark disk out of the PS2 and put in your burned game.

6) Gently push the PS2 cd tray fully back into the PS2 (Don’t press the eject button).

7) Now you need to slide that white tab all the way back to the left (its origional position). To do this you get a strong papper clip(needs to be a strong one) stick it into the PS2 on the right side of the white tab and push the tab back to the left.

8) If you pushed the tab all the way back to the left and did every thing else right, you are ready to play your game. Just press X on your PS2 controler and watch as your burned game loads. ( It may load slower than an original game, depending on the cd-r you are using, I use Verbatim cd-r’s and have no problems.)